Hot Tub Chemicals - Clear, Clean and Healthy Water
Most
of you like to sit in a hot tub, feel the touch of warm, clean water
which takes away the pains and aches of the whole day. You may get
dissatisfied a lot to find the water dirty, smelly or with floating air
bubbles that come in contact with your skin. But you should not bother.
Knowing and using the three of the most important hot tubs chemicals
will help you restore the health of water in your tub and add to your
soaking pleasure.
Three Important Chemicals for Your Hot Tub Performance
Sanitizing Chemicals – These
kinds of Chemicals keep the hot tub water healthy and free from
bacteria. With their use, you won’t just let bacteria to grow in your
hot tub and spoil your fun of soaking. Sanitizers like Bromine, Chlorine
or Biguanide can remove bacteria from your tub. However you have to use
things like Ozonator or Mineral Spa care to control the amount of
sanitizer in the water. It is the test equipments that will tell you how
much sanitizer will be required for your tub water.
Shock Oxidizer - It
will help remove the algae that can make your tub water look greenish
and dirty. The development of other organic stuff like cosmetic, skin
oil, dead skin cells and lotions can also be eradicated using oxidizer.
Additionally, it can forcibly bring oxygen into the tub water, starving
bacteria, preventing unclear water, and eliminating and reducing various
maintenance problems like clogged filters or pipes. However, your
selection of shock oxidizer should be done along the lines of the
sanitizer you have picked up for your hot tub. If you are using hot tubs
chemicals like Bromine or Chlorine, you need to fill the hot tub using
Chlorine shock first. Thereafter, a non-chlorine variety can be tried.
Chemicals for Maintaining pH Balance: pH
indicates the amount of hydrogen ions present in the tub water. It is
necessary to keep it at a balanced point as low (acidic) or high
(alkaline) pH can cause damage to the tub equipments.
The
pH of your hot tub should be a little above neutral point, ranging from
7.2 to 7.8. Water is to be maintained at the proper alkaline level as
slight acidic water can irritate your skin, corrode the parts especially
the metal parts in pipes, pumps and nozzles. Keeping the water on the
alkaline side of neutral is important, because even a little acidity can
cause skin irritation. Similarly too much alkalinity can imbalance the
metals and minerals in the water, deposit it on the acrylic surface of
the spa and cause slow wear and tear in jets and pumps.
Still looking for which chemicals you should purchase for performance of your home tub? Just check out the hot tubs chemicals selling on Cedar Tubs Direct. We also deal in Hot tubs covers and accessories that will compliment your tub and enhance your spa experience!