Know When Your Spa Pump Requires Treatment or Replacement

 

Having a home spa is one of the best ways to relax and rejuvenate while spending quality time with loved ones. However, you can achieve all this only when your home spa functions correctly. And when it comes to spa functioning, it relies heavily upon the spa pump and electrical system. It offers you with heating, lighting, jets and filtration.

When it comes to home spas or any other spa system, spa pumps play a vital role. Spa pumps are an essential component of any spa. When a spa pump gets aged, damaged or faulty, it can lead to creating problems with even the most mundane spa tasks. While some of the damages caused to your spa pump get resolved with minor repairs or part replacements, many pump issues seek complete pump replacement.

How to know when the spa pumps need repairing and when replacement? Take a look at a few signs that entail your spa pump's health!

Unusual Sounds

One of the most common and initial signs that determine that your spa pump has worn out or has aged is when it makes unusual noise or sound. While it is likely that you will hear some pumping noise while using your spa, but when you notice that there is an increase in the noise or sudden change in it, you must get it checked. For instance, if you notice humming noise without any water flow, it indicates that there is either pump seizure or electrical faults. Similarly, if there is squealing or rumbling noise while running it indicates bearing failure.

Decrease in Water Pressure

The main function of a spa pump is to add force to the water flow in the desired direction for producing a particular effect just in the same way as high-pressure jets. When the pump gets ineffective, you may notice decrease in water pressure. However, before considering to replace the spa pump, make sure to inspect the pump for any debris. Many times, debris tend to block the impeller and affect the movement of water. But if you do not find any debris, the decrease in water pressure may be due to damage or wear and tear to the pump.

Motor or Pump Failure

For working efficiently, you spa pump and motor need to operate efficiently in tandem Long with your spa controller and heating system as well as touch pad controls if fitted. In case you switch on the spa pump, but there is not operation, then there might be an issue with the pump or the controller, but either way it is an electrical fault which needs to be immediately attended by experts. In certain scenarios, the motor runs but there is no water flow. Such an issue occurs when air gets trapped in the pump casing or pipe work, especially if you have drained or refilled your spa recently.

Water Leakage

A spa system relies on your plumbing system and electrical system working in tandem. Unfortunately, when one of these systems gets disturbed or damaged, neither may work. If you notice water leakage from your pump or the surrounding pipe work, it can lead to electrical failure. So whenever you notice water leakage around the pump, make sure to turn off all your equipment to ensure electrical safety. Then inspect your pump and pipe work for locating the source of leaks and resolve the issue swiftly for avoiding electrical failure.

Error Messages on Spa Controller

If you have a digital display spa controller, you may receive an error message regarding the water temperature or heater failure or control system failure, whenever there is fault in spa pump and motor. The error message vary with brand and model of controller!

Conclusion:

Looking for a new spa pump to replace the old damaged one? Northern Lights offer a wide selection of spa pumps that are ideal for your home and commercial spa systems. For more information visit https://www.cedartubsdirect.com/hot-tub-pumps-c-4.html

Tips and Tricks to Maintain Your Hot Tubs

Are you a hot tub owner? Have you been facing issues with your hot tubs often? Then you need to know a few expert tips and tricks to maintain them for the long run and keep these in great working condition.

• Never turn the power off and leave your hot tub filled with water specifically during the winter. It might cause disaster in case the temperature drops. Getting a frozen hot tub repaired can be an expensive affair. A hot tub is designed to run 24/7 at the lowest possible energy use of any spa.
• Avoid leaving your hot tub full and running if you are not going to preserve the water. Doing so will only make a way to end up with a stinky, unhygienic mess that will need a lot of work by you to get it cleaned up.
• Never let your hot tub cover become so heavy that it becomes difficult to lift it. It will ruin your pleasure out of using your hot tub, costs you money in additional heating costs and will cause harm to the lifter.
  
• Do not take out the hot tub filters from the filter compartment and overlook cleaning them before they dry out. You will have to look for purchasing new filters.
• Never fail to clean your hot tub filters every two to three months even if you are not using your hot tub. Also make sure to replace the filters every 2 to 2.5 years. Remember clean filters are necessary to maintain clean water.
• Do not forget to change your silver ion cartridge every four months to uphold the highest efficiency and clean water.
• Never use the hot tub as a bathtub to wash out your dirt and grime. Take shower before taking hot tub bath. Avoid bubble bath! Make sure there is no foam in the hot tub.
• Avoid ignoring to check your ozone generator at regular intervals to check if it is in working condition or not. According to various research, it has been concluded that about 60% of older ozone generators fail to produce adequate levels of ozone for sanitation. If you think that the presence of bubbles from the ozone jet of the spa indicates adequate production of ozone, then you are wrong.
• Avoid getting into the hot tub if you find the water is green, or notice mouldy smell or is spilling over with foam. These are the sure signs that the water is not clean and hygienic. Always make sure to drain and refill and follow the activation procedure for adding water care products.
• Never ever try to cover your hot tub with clear plastic or surround it in a plastic green house. Plastic will amplify the rays of sun and lock in heat, which may cause the cover insulation to melt.
• In case your hot tub has begun to throw tantrums, or any part of your hot tub has become dysfunctional, never delay in buying the required spa parts to replace the damaged ones. But make sure to look for genuine spa parts.

Looking for Balboa spa parts in Canada? Make sure to choose a genuine dealer as you may find many dealers who might provide you with fake products. Always research thoroughly about the genuine dealers of Balboa spa parts in Canada.

Conclusion:

Northern Lights offer genuine and best quality Balboa spa parts in Canada. For more information visit https://www.cedartubsdirect.com/balboa-spa-heaters-ezp-43.html