Most Common Spa Pump Problems

Do you know that a spa or hot tub pump is a vital piece of equipment for any hot tub or spa? Normally the high performance spa pumps help you in providing an optimal soaking experience by drawing water into the spa’s filtration system from where its momentum pushes the water through the filter, heater and spa jets (before the water is returned to the spa). 

About Spa or Hot Tub Pump and Their Common Problems:

A spa or hot tub pump is comprised of two main components- the motor and wet end. Located inside the wet end the impeller is powered by the motor to propel the water trough a discharge port on the pump (located on the side of the housing). Spa or hot tub pumps are available in one or two speeds and horsepower ranging from 1/8 HP for spas (for only water circulation) to 5 HP for spas (having a large number of jets). 

The Common Spa or Hot Tub Pump Issues:

It is found that a quality spa or hot tub pump can last for an average of five to ten years. After this duration, you can see the spa pump experiences some common maintenance problems or major breakdowns. Here are some common spa or hot tub pump issues like:

• Leaking: Loose frames of a pump may cause the water to escape while being propelled through the it. To fix it you need to check the frames and o-rings to ensure that they are secure and tight, which will prevent the leak. In many cases a faulty spa or hot tub seal leads to leaking issues. For which, it is highly recommended to change out the pump seal with a leak free fit and tight one.
• Low Water Pressure: If your spa or hot tub pump faces low water pressure, then there may be obstructions, which can prevent the impeller from turning. In this case, you need to check and remove the debris that prevents further jamming.
• Any kind of Abnormal Noise: Worn out bearings of your spa or hot tub motor can produce a humming sound and ultimately prevents the motor from functioning in a correct way. To fix this issue, you need to check the bearings for corrosion or dirt and replace them (if worn out).
• Overheating: When there is not enough clean air flowing into the motor, then it can result in an overheating issue. In this case, you can take a preventive measure by placing your spa or hot tub pump in an area, which is free from dirt and leaves.
• Motor Failure: If the motor inside the pump is not working, then make sure to check the power switch, failed relays, burned out wires or a blown fuse.

How to Choose the Right Spa or Hot Tub Pump?

In market, you will find there are different types of spa pumps available, which at times make it challenging for you to choose the correct replacement. To make the right choice and purchase, you can rely on one of the leading online hot tub or spa parts and accessories supplier- Cedar Tubs Direct. You will find a wide variety of spa pumps at Cedar Tubs Direct to select and buy the right one as per the requirement. We stock the top quality and high performance spa or hot tub pumps that are available at the best price. 

 

Call us today at 1-800-759-8990 or click on this url: https://www.cedartubsdirect.com/hot-tub-pumps-c-4.html to check out a wide selection of hot tub or spa pumps.