A pump is the important aspect of a hot tub or spa system. The main feature of the spa pump is the reliability. If you focus more on cost rather than quality, remember that these systems don’t last much. If a pump fails working, it can result in significant damage like leading to water in the piping freezing or flooding of the home and other damage.
Take a look at below discussed factors when considering replacement spa pumps.
Focus on the voltage.
You should know whether your existing spa pump operates at 110-120 VAC or 220-240 VAC.
Check for horsepower/amps.
Generally, pumps are specified as true horsepower, HP. If you don’t know, you should check the Amps ratings present on the motor label. If you want to double the flow, it increases the horse power by eight times. Even a small change in the horsepower either up or down will have little impact on flow.
Check the speed of the pump.
Know whether your spa pump is a two speed pump or a single speed pump. All Northern Lights spa pumps are 2 speed pumps; but can be used as 1 speed pump. You can use a 2-speed pump like a 1-speed pump by connecting the high speed terminal. However, the Northern Lights circulation pumps come as 1-speed pumps.
Focus on the arrangement of connections.
Northern Lights spa pumps are center suction and side discharge pumps. Most of the pumps are specifically designed to use 2” unions; but a few of them have 1 ½” unions like most circulation pumps. Some pumps are known as center discharge whereas others have bottom suction called as whirlpool pumps.
Buying the 1/15 HP 110v-120v Balboa Spa Circulation Pump
This Balboa spa circulation pump is considered as one of the most energy efficient pumps available on the market. It combines the best of both technologies i.e. the proven reliability of the Ultima pump wet end and the dynamic Wow motor that revolutionized the spa industry.
This high flow circulation pump provides around 67 gallons per minute flow while operating and draws only 1.3 amp. It is perfect for whirlpool applications where quiet efficient operational circulation is required. The Balboa spa pump is specifically designed as a circulation pump and used in spas that come with a circulation system.
This spa pump comes with 1/15 HP single speed and operates at 120 VAC. The low speed circulation pump is used in two pump configurations and moves water quietly and continuously throughout the heating system and filter.
The safety features of the spa pump include auto shut off protection in case of plugged suctions and high heat limit overload protection. This Balboa spa pump comes complete with two 1 ½” replacement unions that can be expanded easily to fit larger 2” standard PVC plumbing.
The system has hygienic drain plug that makes sure that there is no water left inside the pump body during storage. It always prevents damage from freezing where required. This unit is backed by a two year manufacturer warranty that covers both the pump and the motor.
Bottom Line –
Want to learn more about Balboa spa replacement pumps? If yes, then you should look no further than Northern Lights Cedar Tubs Direct. For more information, please feel free to contact us today at 1-800-759-8990.
No comments:
Post a Comment