5 Hot Tubs Chemical Products for Hot Tub

Do you use your hot tub often? If yes, it’s essential to maintain the chemistry of hot tub water. If left unattended, it can be a breeding ground for harmful pathogens that can cause illness or rashes. This is because water is maintained to be warm.

Though the hot tub is a relatively more minor body of water, it doesn’t take that long to get contaminated. Unfortunately, hot tub users often don’t test or use improper methods that lead to poor quality water. So check out the most common types of hot tub chemicals that you will need to maintain your hot tub water.

1. Sanitizer

Sanitization is an important parameter you should monitor as it helps eliminate pathogens from the water. Consider using a sanitizer to keep your hot tub water clean and clear and make it safe to use. The most common and effective sanitizers are chlorine and bromine. Bromine is the more popular method as it performs very well in hot water. However, you don’t ignore this chemical as it makes the most significant impact on the quality and health of your water.

2. pH

If the pH level of water is too low, the water will be acidic and can badly damage your hot tub. If the pH goes high, it can result in cloudy water, stains and scale. Generally, the pH should be within 7.2-7.8, and you can make adjustments by using pH down and pH up.

3. Alkalinity

Alkalinity greatly helps your pH. In short and simple words, it keeps the pH level from bouncing. You have to maintain the alkalinity of 80-120 ppm and check what works right for you. Remember that pH is strongly related to alkalinity. One affects the other.

4. Calcium Hardness

Most people consider using calcium hardness with plaster pools and think it’s not that important for fibreglass, acrylic pools or spa. You should keep in mind that the amount of calcium is essential to maintain the water clarity that you shouldn’t ignore.

5. Metal Removal

Do you fill your hot tub or spa with well water or your local water supply? It might be possible that your water contains some metals. Hence, you need to test the water for metal content like copper and iron. Both metals can cause stains on your hot tub and make your hair green if untreated for longer.

Bottom line –

You should consider several hot tub chemicals to make sure that your hot tub is ready to use safely. However, it’s not that hard to keep your hot tub water clean and clear when considering testing and treating water regularly.

If you’re not careful about maintaining your water, it will cost you more in the long run. Browse hot tub chemicals available at Northern Lights Cedar Tubs Direct and enjoy spending more time in your hot tub or spa safely and conveniently. For more information about our products, please contact us today at 1-800-759-8990.