A Glance at Some Common Issues Spotted in Spa Pumps!

Spas at home offer utmost relaxation and peace of mind, but only if it functions correctly. And its functionality depends upon spa pumps and the electrical system within it. The system is responsible for providing you heating, jets, lighting and filtration.

 

Spa pumps are one of the most important components of your home spa which when becomes old or damaged or faulty, it can ruin your spa experience. While some of the pump damages can be repaired or exchanged, there are a few that required complete replacement.

Let us have a look at some of the common issues in the spa pumps that may require you to exchange or repair your spa pump.

• Unusual Sounds

The most common and first noticed signs of an ageing or faulty pump is an unusual sound or noise while using the spa. If the noise increases or changes suddenly, then make sure to check the pump. If there is a humming noise without any water flow, it indicates the seizure of the pump or fault in electrical system. If you notice squealing or rumbling noises while using the spa, then it indicates bearing failure.

• Declined Water Pressure

The main function of spa pumps is to force water flow in the required direction for producing a particular effect like high pressure jets. Hence, if you notice a decline in the water pressure, then your pump has become inefficient. However, before you conclude to replace it, make sure to inspect the pump for any debris. If there is no debris found, then it confirms damage in your spa pump.

• Failure in Motor or Pump

The spa pump and motor needs to operate efficiently along with your spa controller and heating system to offer you a great spa experience. So in case after switching on the pump nothing happens, then you may have an issue with the pump, motor or controller. Also, there might be electrical faults as well. Again, at times the motor operates but there is no water flow, then air might have got trapped in the pump casing or the pipework.

• Water Leak

The plumbing and electrical system plays a vital role in the functionality of your spa; hence, both the systems need to work in tandem. So if water begins to leak, it can hamper the electrical system as well causing failure of spa. In case of water leakage, make sure to turn off all your equipment for ensuring electrical safety.

• Error Message on Spa Controller

If you have installed digital display spa controller or touchpad, there are chances that you may get error messages relating to the heater failure or control system failure or water temperature, whenever fault occurs. The error messages occur mainly due to electrical faults!

So areyou facing any of the troubles mentioned above?Then, immediately have a check on the spa pump and the electrical system!

 

Conclusion:

Faulty spa pumps can ruin your spa experience. Hence, whenever you notice any unusual signs like noise, declined water pressure or any other fault, make sure to check on the spa pumps. If you want to replace your spa pump with a new one, then Northern Lights Hot Tub Parts are your best bet. For more details visit https://www.cedartubsdirect.com/hot-tub-pumps-c-4.html

Understanding Spa Pumps

Featuring with important components, a hot tub is highly responsible to deliver warm, therapeutic water allowing you enormous opportunities to enjoy. It’s quite understandable that you haven’t focused on all the hot tub parts.

But understanding them better can help you know the basics to take proper care of your hot tub as well as identify a specific problem whenever it arises. Please check out this post and know what exactly a hot tub circulation pump is.

Defining a Hot Tub Circulation Pump

Hot tub circulation pumps or spa pumps are generally low flow pumps that help in water circulation inside a hot tub consistently in a slow and controlled motion which heats, chemically treats and filters water continuously.

Not every hot tub comes with a circulation pump; some may come with two speed pumps. If you want to know whether your hot tub has a circulation pump, you have to look at the number of Amps on the label. If you find it’s under 1.5 Amps, it’s a circulation pump.

Balboa’s hot tub circulation pumps are designed with superior filtration capabilities and deliver the highest gallon per minute rate in the hot tub industry. The higher GPM makes sure that the pump produces energy efficiency and up to four times more filtration than the other types available on the market.

Read More- https://balboaheatertubes.wordpress.com/2020/01/06/understanding-spa-pumps/

How Do You Buy Right Hot Tub Pumps?

Hot tub pumps are the most important accessories of your spa. Without them, you will get a big bucket of water in your backyard. The hot tub pump circulates water while heating up and creates the pressure to make your jets amazing to enjoy.

When it comes to enjoying the luxury of your hot tub, finding the right spa pump makes sense. To make the right selection, most spa owners focus on the massaging power of jets, quiet performance, installation process and pricing. With the availability of products, it can be nearly impossible to find what suits your spa the best.

Read More- https://balboaheatertubes.wordpress.com/2019/12/10/how-do-you-buy-right-hot-tub-pumps/

Spa Pumps The Heart of Hot Tubs

Spas are one of the best things that we can include in our homes. Spas not only rejuvenate our body but mind and soul. However, your spa is of no use without a spa pump. Spa pumps are the heart of any spa. The principle on which a spa works is that water is pulled through sources and then passes through a heater before emerging out of the jets and allows you to take a hot rejuvenating bath in your tub. And without spa pumps the water cannot be moved and hence cannot be heated.

 

 
The spa pump comprises of two parts i.e. the wet end that contains the impeller, which is the key moving part of a spa pump and a motor that turns the impeller. Spa pumps draw water from suction ports such as skimmers and main drains and the water comes out through the jets.

 

Importance of a Spa Pump

Spa pumps as already mentioned pull water through the filter and lets the water come out through the jets in 50/50 air to water ratio.  And there are certain spa pumps that are specifically designed for circulation of water as well. However the key function of a spa pump is warming the water up by pumping the water through the heaters. Another important role that a spa pump plays is it keeps the water clean while circulating. No matter how advanced your spa tub is or how many jets you have in it, if the water is not pumped at the required pressure there is no use of a hot tub!

Read More- https://balboaheatertubes.wordpress.com/2019/11/23/spa-pumps-the-heart-of-hot-tubs/

Take Advantage of Balboa Spa Heaters

Do you’ve any idea of lounging around outside in bubbling warm water? It sounds appealing, right? But how do you accomplish this? Now, it’s time to bring the future of heating comfort to your spa or pool with spa heaters.

If you really want to heat up your pool or spa quickly, then Balboa spa heaters are the perfect way to go. It’s wise to upgrade your old spa pack and hot tub heater with Balboa spa kit. Out of all Balboa spa heaters, Balboa VS501z uses simply the best spa technology in the market. It features completely digital circuitry – which leads to less failures, more accurate heating, and much simpler to operate.

The Balboa VS501z Spa Heater –

The Balboa VS501z spa heater works at either 120 VAC producing 1.5KW or operates at 230 VAC producing 5.5 KW of heat energy. This heater fits any standard 2” or 1 ½” plumbing – which makes it ideal to upgrade almost any old spa pack.

Balboa spa packs can replace any hot tub heater in the market like Hydro Quip, LA Sas, Coleman Spas, Arctic Spas, Gecko, Hot Springs, Len Gordon, etc.

The Unique Features –

The Balboa spa heaters have built-in programmable features like cycle programming, sleep mode, economy mode, and self-diagnosis. In addition to, weather freeze ups can be eliminated easily with the built-in freeze protection system.

The heating systems have the ultimate ability to choose how much current will be drawn ensuring the use of 30 Amp breakers, or 40 Amp.

The Specialties –

Balboa spa heaters have receptacles for the following:

One 2-speed pump, one 1-speed pump or blower (but not both), one circulation pump, one ozonator, one constant-on for audio or visual devices, and one 12 volt light – all receptacles except light can be switched to supply 230 or 120 Volts.

The Balboa Spa Pack comes with:

• VS501Z pack – stainless steel portable heater with 2” heater tail pieces
• Plasticized control instruction sheet, complete instruction manual for retrofit situations

The Patented M7 Technology –

The M7 Technology eliminates the requirement of remote heat sensors and pressure sensors like older spa packs. This latest technology allows the spa pack to be kept in any location or direction. This means, the flow direction does not matter unlike other hot tub heaters.

The Specifications –

• 12 V light that supports LED lighting
• 120 or 220 VAC ozone support
• 10.56" height x 19.5" length x 4.60" depth
• UL, CSA, and CE certification
• 120/240 VAC at 50/60 Hz
• Additional infrared waterproof remote control
• 2 years manufacturer warranty

Conclusion –

Buying a new or looking to upgrade your existing spa heater? You should invest in Balboa spa heaters at Cedar Tubs Direct and get relaxing spa sessions year-round.

Check out our available spa heaters at https://www.cedartubsdirect.com/balboa-spa-parts-balboa-spa-heaters-c-115_146.html and make a perfect selection for your daily spa and hot-tub needs.

Hot Tub Covers:Know All Before Purchasing

Purchasing a new hot tub cover to replace the old and sagging one can be a bit costly affair, but the energy savings you earn from it will pay off the cost soon. Many of you are able to wash away stress as well as strain against the animated jets of a comforting hot tub. Purchasing a replacement hot tub cover is the last thing on your mind. Sadly, hot tub covers take maximum pressure in saving your hot tub from the waste, including dust, dirt, bugs, leaves etc. You can successfully minimize the effects of evaporation by using a cover on your hot tub. The cover fitting perfectly, without any gap, will help retain the heat, sanitizers, and water inside your tub. Normally, you may require a hot tub cover replacement every 3-5 years in the Northern regions, and every 3-7 years in the Southern regions.

A replacement hot tub cover is effective in protecting your hot tub from chemical/heat loss. It also acts as a physical barrier to keep pets or small kids away from the tub itself. A quality certified and properly locked cover will help you avoid tragic incidents from taking place in the hot tub. So, check for the pet/child safety features while you purchase hot tub covers.

When you are getting ready to purchase a costly item like a replacement hot tub cover, you should know about a few crucial things. Knowledge of all these things will make way for a successful purchase.

1. Know when you need a replacement hot tub cover – Go on checking the underneath and find out any signs of corrosion from mold deposition and imbalanced chemicals. If your hot tub cover feels heavy and drenched, it is obvious that the foam is soaked in moisture, requiring a replacement cover at the earliest.
2. Know about the quality of hot tub cover vinyl – The vinyl of your hot tub cover should be waterproof and mildew proof. It is achievable only when your tub cover has top quality marine grade vinyl. Even if the quality of marine vinyl varies from 26-34 ounces, you can be sure of enjoying protection against UV damage, discoloration, bad odor etc.
3. Know the cost of hot tub cover – Purchase of a replacement hot tub cover is a costly investment. You will be able to find a quality tub cover within $400-$600. The cost may vary according to the thickness and size of the spa cover. Any cover that comes under the mentioned price range is going to be poor in quality as well as performance.
4. Know about the foam thickness – The thickness of a hot tub cover decides its effectiveness during harsh weather elements. It normally varies from 4″-6″. It is often recommended to go for thicker foam especially if you reside in Northern region. The thick foam handle heavier snow loads, ensures more insulation and lowers energy costs.
5. Know what the perfect color for hot tub cover is – You need to choose for a hot tub cover in a color that suits the setting of your hot tub. Be it charcoal, black, navy, walnut, burgundy or any other color, your hot tub cover should go well with the surroundings.
6. Know how to correctly measure the hot tub cover – You can’t expect the hot tub cover to fit well without proper measurement. So, knowing about the right size of your hot tub is necessary. Before you place an order for the tub cover, consider measuring the length, width, corner radius, skirt length etc.

Cedar Tubs Direct is the best place you can visit for purchasing replacement hot tub covers. It is offering custom-made replacement hot tub covers in any style and color perfect for all kinds of climate conditions. For the most durable and effective hot tub covers, check for the collection of Cedar Tubs Direct. It ensures affordable pricing along with exceptional customer service to make your hot tub cover purchasing a pleasant experience. Consider calling Cedar Tubs Direct on 1-800-759-8990 for getting delivered with a quality hot tub cover at a reasonable price!

Balboa Circulation Hot Tub Pumps

Are you in the market for hot tub pumps? After all, pumps are the important part of your spa, and there’s more to them than you think.

 

When it comes to relax in the luxury of a spa, finding the ideal, most efficient replacement spa pump can be a bit difficult.

 

How Do You Choose the Right Hot Tub Pump ?

To make sure you find the right spa pump replacement, here are a few things you should look for:

•    The manufacturer name

•    The size of the frame

•    The speed

•    The voltage

•    The horsepower

•    The pump plumbing size

While considering all these features of hot tub pumps, we suggest Balboa Circulation. It can be a perfect bet for your spa requirements. Go through this post to find out how:

What is a 1/15 HP Balboa Circulation Pump?

Balboa Circulation Pump is considered as one of the most energy-efficient pumps available in the market. It basically combines two technological features, like the Ultima pump wet end and the dynamic WOW motor- which has revolutionized the bathing market.

However, the high flow circulation pump has the ability of 67 gallons per minute flow while operating and drawing only 1.3 amperes. These pumps are the perfect alternative to whirlpool applications – where noise-free, efficient running circulation is required.

Balboa circulation pump is used in spas – which have circulation systems. It’s a 1/15 HP single speed and runs off 120 VAC. In fact, the low speed circulating pump is generally used in a two pump configuration. It enables a quiet movement of water so that water can flow through the heating and filter system continuously. Besides, the spa pump comes with safety features like auto shut off protection during plugged suctions and limit high heat overload.

The Unique Features of Balboa Circulation Pump –

•    Two 1 1/2″ replacement unions – which can be expanded easily to fit larger 2″ standard PVC plumbing.

•    A hygiene drain plug to make sure no water is left in the pump body during the storage and prevents freeze damage – if required.

•    Drilling inside the ports, water can be bypassed and used with accessories like pump heat jackets and ozone systems.

•    The entire heat pump unit is backed by two years manufacturer warranty – both on the pump and the motor.

•    4 –way rotation – left, right, up and down ensuring smooth operation.

Conclusion –

Are you in search for the most reliable hot tub pumps in the market? Then, look no further than Balboa circulation hot tub pumps at Cedar Tubs Direct. We have the huge selection of spa pumps manufactured by Pentair, the largest pool and spa plumbing manufacturer around the world. Moreover, the Ultra Jet line of Balboa spa pumps is simply the finest standard in the market. For more information about our hot tub pumps, please make a visit to our website at https://www.cedartubsdirect.com/.