Spas
at home offer utmost relaxation and peace of mind, but only if it
functions correctly. And its functionality depends upon spa pumps and
the electrical system within it. The system is responsible for providing
you heating, jets, lighting and filtration.
Spa
pumps are one of the most important components of your home spa which
when becomes old or damaged or faulty, it can ruin your spa experience.
While some of the pump damages can be repaired or exchanged, there are a
few that required complete replacement.
Let us have a look at some of the common issues in the spa pumps that may require you to exchange or repair your spa pump.
- Unusual Sounds
The
most common and first noticed signs of an ageing or faulty pump is an
unusual sound or noise while using the spa. If the noise increases or
changes suddenly, then make sure to check the pump. If there is a
humming noise without any water flow, it indicates the seizure of the
pump or fault in electrical system. If you notice squealing or rumbling
noises while using the spa, then it indicates bearing failure.
- Declined Water Pressure
The
main function of spa pumps is to force water flow in the required
direction for producing a particular effect like high pressure jets.
Hence, if you notice a decline in the water pressure, then your pump has
become inefficient. However, before you conclude to replace it, make
sure to inspect the pump for any debris. If there is no debris found,
then it confirms damage in your spa pump.
- Failure in Motor or Pump
The
spa pump and motor needs to operate efficiently along with your spa
controller and heating system to offer you a great spa experience. So in
case after switching on the pump nothing happens, then you may have an
issue with the pump, motor or controller. Also, there might be
electrical faults as well. Again, at times the motor operates but there
is no water flow, then air might have got trapped in the pump casing or
the pipework.
- Water Leak
The
plumbing and electrical system plays a vital role in the functionality
of your spa; hence, both the systems need to work in tandem. So if water
begins to leak, it can hamper the electrical system as well causing
failure of spa. In case of water leakage, make sure to turn off all your
equipment for ensuring electrical safety.
- Error Message on Spa Controller
If
you have installed digital display spa controller or touchpad, there
are chances that you may get error messages relating to the heater
failure or control system failure or water temperature, whenever fault
occurs. The error messages occur mainly due to electrical faults!
So areyou facing any of the troubles mentioned above?Then, immediately have a check on the spa pump and the electrical system!
Conclusion:
Faulty
spa pumps can ruin your spa experience. Hence, whenever you notice any
unusual signs like noise, declined water pressure or any other fault,
make sure to check on the spa pumps. If you want to
replace your spa pump with a new one, then Northern Lights Hot Tub Parts
are your best bet. For more details visit https://www.cedartubsdirect.com/hot-tub-pumps-c-4.html
No comments:
Post a Comment