When it comes to using hot tub plumbing in Canada for years to come, preventive maintenance goes a long way. You’ve likely the habit of cleaning your hot tub cover, shell and maintaining the water. Yet, there’s another important aspect of your hot tub that you often overlook, i.e., your hot tub plumbing.
Hot tub plumbing can give rise to a lot of nasty biofilms, the buildup of dirt and grime in the form of bacteria and other organic contaminants. However, your hot tub plumbing is a perfect place for bacterial growth. All they need is warm water, organic matter, and a surface. Please remember that they don’t require sunlight for growth and development.
The important signs to look out for a buildup in hot tub plumbing
- Check whether there’s any bad smell coming from hot tub water.
- Check whether the hot tub faces difficulty in balancing water, after a refill.
- Check whether the hot tub has dirty water or water film after a refill.
- Check whether you have an improperly drained hot tub
Here is a simple plan to plan a maintenance practice for hot tub plumbing in Canada:
1. Take a look at your filter cartridge.
Open the filter gently and take a look at it. If it’s been a year, you should replace the filter. If the filter is still in right shape, clean it up to get rid of grime and use a spa filter cleaner. Make sure that you rinse the filters thoroughly as the cleaner residue is a common reason for foam inside your hot tub.
2. Jet and circulate.
Switch on the jets and let the system circulate for at least 30 minutes. If you’re out of time and want to get the hot tub drained, you can stop circulating. If the time allows, consider circulating the hot tub for 24 hours. It will really do a great job of eliminating the nasty biofilm critters.
3. Drain and scrub.
Drain the water perfectly from your hot tub. If your hot tub requires cleaning, this is the right time to do so. You don’t want to be stuck with white or green slimy lines for the next couple of months. Try to avoid soap based cleaner as it leaves residues, which are the common causes of foam.
Prepare a solution of an equal amount of white vinegar and water to erase those water lines or use a spa surface cleaner. Don’t miss out cleaning the hot tub cover, top, and bottom with products designed specifically for hot tub covers.
4. Fill the hot tub.
Now that your hot tub is perfectly clean; it’s time to replace the water. This will take time, and it’s the right time to walk around and check for leaks if there’s any.
Fill up the hot tub by sticking the hose in the filter. It directs water through the filter and pipes quickly to get rid of trapped air inside the system. Trapped air inside the pipe can result in airlock and damage in the pump.
5. Balance and sanitize hot tub.
Now the time has come to check the water and add proper chemicals to check the balance of water. Add your startup chemicals including sanitizer. Make adjustments in the pH level as required for sanitizer system to work well.
Bottom Line –
Regularly flushing your hot tub plumbing is important for good reasons. It leaves your hot tub with cleaner water and a safer hot tub environment. This means you won’t need to worry about the critters floating around in your water.
Do you need a replacement for hot tub plumbing in Canada? If yes, feel free to browse the collection of hot tub plumbing available for sale at Cedar Tubs Direct. For more tips and suggestions on hot tub plumbing maintenance, please stay tuned with us!
No comments:
Post a Comment