How Does Hot Tub Plumbing System Work?

Most hot tub owners in Canada often overlook the hot tub plumbing system. As it stays in the background, you always focus on relaxing and enjoying your time. You don’t have time to figure out how water pushes through the jets.

Every once in a while, you may wonder how your hot tub creates an extremely peaceful, soothing environment. Read more about hot tub plumbing or spa plumbing in Canada that makes your hot tub sessions happen.

Suction Line and Skimmer –

First of all, the suction line will start sucking in water. Next, the skimmer will remove debris like leaves, insects, etc. Finally, the suction line and skimmer will send water to the pump.

Hot Tub Pump and Filter –

The suction line and skimmer collect water which moves towards the pump. There, the pump pushes water towards the hot tub filter. When the water passes through the hot tub, it will remove small contaminants like dust and dirt particles.

Hot Tub Heater and Manifolds –

When the water gets filtered, it heads towards the hot tub heater. The heater will use its heating element to produce nice and toasty water. Once water gets heated, it will flow through the hot return line and then to the manifolds. In simple words, manifolds are nothing but water diverters. They receive water from a source and divert it to many different places.

Water Jets

The clean and hot water flows from the manifolds to the jets in the hot tub through flexible PVC pipes. In the end, the water goes out of the water jets to reach you.

Other Important Elements of Hot Tub Plumbing –

Air Control –

In addition to water, hot tubs can draw in air and push them out through the jets, which creates a pleasant bubbly effect. It can be achieved through simple air control valves. An electric air injector or blower can help this system.

Sanitation –

No hot tub water is safe enough to relax without using any sanitizer. Traditionally, chlorine or bromine can be used. In this case, you can sanitize your water by using those chemicals in liquid, powder or tablet form.

The water goes to the Ozonator with ozonation once it’s filtered and heated. Then, you can add bacteria-busting ozone molecules to the water. The same goes for the saltwater sanitation systems. When the water is clean and hot, it goes to the salt cell, which will be sanitized before pushing into the hot tub.

How do you take care of your hot tub plumbing in Canada?

You might think the hot tub plumbing is inconsequential. But remember that, without plumbing, the hot tub feels like just a large bucket of cold water. So, it’s important to care for your spa plumbing system.

This way, you will ensure that your hot tub provides more relaxation and fun to you and your family. If you want to learn more about hot tub plumbing fixtures in Canada, please contact Northern Lights Cedar Tubs Direct at 1-800-759-8990.

What are the Important Hot Tub Parts?

When buying hot tub parts in Canada, Northern Lights Cedar Tubs Direct is the one-stop-destination you should look out for. We provide a comprehensive range of parks for all makes and models of hot tubs or pools. In addition, our experts are readily available to help you find what you need for your pool or hot tub. Take a look at a few hot tub parts discussed below:

Jets –

You will find water jets of all makes and models for hot tubs and spas in our inventory. Whatever type of hot tub jets you want to buy, you will find them at Northern Lights Cedar Tubs Direct inventory. All of the jets can provide you with an exceptional experience. So give us a call now, and we'll help you know whether your hot tub is compatible with these products.

Pumps –

Do you need a replacement pump for your hot tub? At Northern Lights Cedar Tubs Direct, we offer Balboa hot tub pumps with variable speeds to replace your existing hot tub pump system. If you need help with a replacement heat pump, our experts will suggest the right approach to keep your hot tub unit up and running.

Hot Tub Heaters –

There is such a wide variety of heating elements, manifolds, and sensors available to help you get back into your favorite hot water. If you are unaware of what you need, our experts will identify it quickly and precisely. We'll get your hot tub heating needs covered, whatever type of Balboa hot tub heaters you want for your hot tub.

O-rings and Gaskets –

O-rings and gaskets help you make sealing perfectly as well as unions flawlessly. You will need to look for the proper O-rings and gaskets to make your hot tub more accessible and seamless.

Filters –

It's highly suggested to filter your hot tub regularly to ensure the longevity and safety of your hot tub. Most hot tub filter manufacturers recommend replacing your filter once every six to twelve months to ensure that the hot tub filter gets working efficiently.

Hot Tub Plumbing Parts

When buying replacement parts for hot tub plumbing in Canada, you should look no further than Northern Lights Cedar Tubs Direct. We have extensive years of experience and know-how to help you get the right replacement parts for your hot tub plumbing system in Canada.

Whatever hot tub plumbing parts you want to buy in Canada, we have the top-quality parts to replace your damaged or broken parts. We provide spa plumbing parts and PVC plastic parts, including Spa Parts - 1 1/2" Pump Union with Gasket, Spa Parts - 2" Pump Union with Gasket to keep your hot tub plumbing in top condition.

Bottom Line –

Whether you want to buy replacement hot tub pumps, filters, hot tub heaters, or hot tub plumbing in Canada, you should look further than Northern Lights Cedar Tubs Direct. For more information about our replacement parts, please contact us today at 1-800-759-8990.

What to Do with a Leaking Hot Tub?

When you find a leak in your hot tub, spa owners without the whole cavity filled with spray foam will spot and fix any kind of leak easily. This is where you need professional help with your hot tub plumbing parts in Canada.

To fix a hot tub leak, you need to find the exact leak area, get parts on hand to fix the leak with good, quick-drying PVC glue, and do the work of cutting out any existing or broken pieces and glue in new, replacement hot tub plumbing parts.

If you want to get the glue PVC connection done, you need to apply the glue by using the dabber in a circular motion around the glue joint multiple times quickly for heat buildup. It helps in heating the PVC connection which ensures a solid bonding. When you apply the glue rapidly in a circular motion at least ten times, it will provide you with ample coverage and make the joint warm.

You need to plug it together by twisting slightly and hold for a few seconds like the repaired joint sets. You may want it to hold for around 30 seconds to make a good bond. You can use a PVC cleaner or primer first on the joint which will be glued. But it’s not necessary if the glue is applied perfectly. Make sure that connections are clean and dirt-free.

You may need handy tools like hose cutters or a hack saw to cut the open pieces of pipe and hose, sandpaper, or other smoothing equipment to eliminate frayed edges at the cut area. Other tools may include the PVC hot tub glue, hot tub plumbing parts, and accessibility to the leak area.

Moreover, you can prevent leaks by keeping your hot tub water maintained. Avoid any remaining water while leaving the hot tub outdoor during winter. Otherwise, it can result in manifold and plumbing cracks to handle in the spring. Hopefully, your hot tub will never require plumbing system repair; but if you do, you should buy hot tub plumbing parts in Canada.

Generally, hot tub plumbing comprises pipes, hoses, and connectors for routing water from the spa pump to the jets and back. The circular path starts at the suction intakes present in the footwell of the hot tub.

When the pump operates, it creates suction at the front part of the pump, connected to the suction intakes. This is protected by a screen or is made up of little holes to get rid of any large size objects into the hot tub plumbing system.

The pump motor spins the internal shaft which turns on the impeller, a little wheel present inside the pump which helps in moving water. The discharge area of the pump helps in expelling water and projects it towards the jets through the manifolds, the plumbing parts with large input and smaller outputs so that the water pressure is distributed evenly throughout the jets.

The glue joints hold the plumbing parts together. Some clips may lighter hoses together, but the PVC glue is very robust and is an industry-standard. Usually, the blue glue is used to bond the PVC parts instantly within a matter of a few seconds.

Do you want to know more about hot tub plumbing parts in Canada? If yes, then you should look no further than Northern Lights Cedar Tubs Direct. For more information, please visit our website today at https://www.cedartubsdirect.com/.

What Are the Different Hot Tub Plumbing Parts & How They Work?

At the end of a long and tiresome day at work, is there anything better than immersing in a hot tub beneath the stars? There’re so many manufacturers who claims that their hot tub products don’t need plumbing, but let us tell you that without a basic plumbing system, your hot tub would simply be a bucket of water to soak in. Like most critical fixtures in your home, your hot tub employs a vital plumbing system to run perfectly. To maintain the cleanliness and comfort of your hot tub, it is necessary to comprehend how your hot tub’s plumbing parts function.

Basic hot tub plumbing:

Though your hot tub is not equipped with a water supply line – the majority of hot tubs are filled & drained employing a garden hose – the plumbing system of the hot tub kicks in once the tub is filled. The plumbing parts of the tub form a closed loop, circulating the water non-stop while the tub is on through many connections, plugs, pipes, valves, hoses and clamps. While there’re many hot tub plumbing parts operating in chorus, the most fundamental plumbing fixtures are:

• Suction lines: To keep the water in your hot tub clean & flowing, a suction line driven by the pump persistently removes, filters and returns water.
• Pump: The pump pushes water all through the tub & plumbing unit through the filter and the skimmer, to make sure the water stays moving and clean.
• Hot return line: Located off of the tub’s heating unit, the hot return line is a system of PVC pipes and basic hot tub fixtures that help supply fresh hot water to the tub.
• PVC tubes: PVC tubes fitted around the hot tub’s exterior help complete the hot tub’s plumbing and supply water throughout all of the different systems and back to the tub.
• Jets: Jets are the most detectable plumbing component of any hot tub. The fast stream of water and air created by the jet nozzle helps massage your skin.

Looking to buy hot tub plumbing parts online? Here at Cedar Tubs Direct, we have a large selection of Spa Plumbing Parts and PVC plastic for any type of hot tub or spa.  We can help you with everything related to Hot Tub Plumbing arts and PVC plastic in Canada. For any further inquiry about hot tub pluming parts, feel free to contact us on 1 800 759 8990.

Understanding the Basic Details of Hot Tub Plumbing System

More often, sauna bathers never give a second thought to hot tub plumbing in Canada. When it comes to enjoying hot tub sessions, all you want is to focus on relaxation and enjoyment. You won’t need to figure out how water gets pushed through the jets. 

At least once in a while, you should find yourself wondering how your hot tub creates soothing and tranquil ambiance. Take a look at this post and understand better about hot tub plumbing systems in Canada:

Understanding the Basic Details of Hot Tub Plumbing Kits 

Now it’s time to get started with an empty hot tub. First of all, you should know what will happen when you fill it with water.

Skimmer and Suction Line –

Suction line will start sucking in water whereas the skimmer will remove debris like leaves, insects, etc. Both the skimmer and suction line are responsible for sending water to the pump.

Filter and Pump –

After that, the suction line collects the water and the skimmer takes it to the pump. The pump pushes the water towards the filter. When the water passes through the filter, it will remove any small contaminants like dust and dirt particles. 

Manifolds and Heater –

The filtered water goes to the heater. The heater uses its heating element to make the water toasty and nice. As soon as water gets heated, the water starts flowing through the hot return line and goes to the manifold. 

Generally, manifolds are water diverters and absorb water from a single source. After that, manifolds divert it to different places. 

Water Jets –

When the water gets hot and clean, it will flow from the manifolds to the jets in a hot tub through a number of flexible PVC pipes. At the end, jets push out the water to reach you. 

Different Elements of Hot Tub Plumbing System 

Apart from the above discussed elements, there are other elements of hot tub plumbing systems that you need to know:

Air Control 

Hot tubs are able to draw in air and expel them through the jets while offering a pleasantly bubbly effect. The availability of simple to use air control valves makes it possible. 

Sanitation –

All you need to have is an effective sanitization to ensure optimal safety and sanitization while enjoying hot tub sessions. Traditionally, either chlorine or bromine is used for sanitization purposes. You will have to sanitize your water by adding those chemicals in liquid, tablet or powder form. 

Apart from sanitizers, you can add a few things to your hot tub plumbing in Canada. For instance, you can buy an ozonator. The ozonator receives water once it’s heated and filtered. Bacterial busting ozone molecules are present in the ozonator to add to the water. 

Typically, this is true for salt water sanitation systems. Once the water gets hot and clean, it should be better sanitized prior to being pushed into the hot tub. 

Maintain your hot tub plumbing system –

A plumbing system is paramount for your hot tub plumbing kit. Your hot tub would be nothing more than a bucket of water. Therefore, you should take care of your plumbing system. This way, you’ll make sure that you provide enormous fun and relaxation to you and your near and dear ones. 

Bottom Line –

So, what are you thinking about hot tub plumbing in Canada? Feel free to reach out to Northern Lights Cedar Tubs Direct team as soon as possible. Contact us today and we’ll get back to you right away.

5 Tips to Maintain Hot Tub Plumbing in Canada

When it comes to using hot tub plumbing in Canada for years to come, preventive maintenance goes a long way. You’ve likely the habit of cleaning your hot tub cover, shell and maintaining the water. Yet, there’s another important aspect of your hot tub that you often overlook, i.e., your hot tub plumbing.

Hot tub plumbing can give rise to a lot of nasty biofilms, the buildup of dirt and grime in the form of bacteria and other organic contaminants. However, your hot tub plumbing is a perfect place for bacterial growth. All they need is warm water, organic matter, and a surface. Please remember that they don’t require sunlight for growth and development.

The important signs to look out for a buildup in hot tub plumbing

• Check whether there’s any bad smell coming from hot tub water.
• Check whether the hot tub faces difficulty in balancing water, after a refill.
  
• Check whether the hot tub has dirty water or water film after a refill.
• Check whether you have an improperly drained hot tub

Here is a simple plan to plan a maintenance practice for hot tub plumbing in Canada:

1. Take a look at your filter cartridge.

Open the filter gently and take a look at it. If it’s been a year, you should replace the filter. If the filter is still in right shape, clean it up to get rid of grime and use a spa filter cleaner. Make sure that you rinse the filters thoroughly as the cleaner residue is a common reason for foam inside your hot tub.

2. Jet and circulate.

Switch on the jets and let the system circulate for at least 30 minutes. If you’re out of time and want to get the hot tub drained, you can stop circulating. If the time allows, consider circulating the hot tub for 24 hours. It will really do a great job of eliminating the nasty biofilm critters.

3. Drain and scrub.

Drain the water perfectly from your hot tub. If your hot tub requires cleaning, this is the right time to do so. You don’t want to be stuck with white or green slimy lines for the next couple of months. Try to avoid soap based cleaner as it leaves residues, which are the common causes of foam.

Prepare a solution of an equal amount of white vinegar and water to erase those water lines or use a spa surface cleaner. Don’t miss out cleaning the hot tub cover, top, and bottom with products designed specifically for hot tub covers.

4. Fill the hot tub.

Now that your hot tub is perfectly clean; it’s time to replace the water. This will take time, and it’s the right time to walk around and check for leaks if there’s any.

Fill up the hot tub by sticking the hose in the filter. It directs water through the filter and pipes quickly to get rid of trapped air inside the system. Trapped air inside the pipe can result in airlock and damage in the pump.

5. Balance and sanitize hot tub.

Now the time has come to check the water and add proper chemicals to check the balance of water. Add your startup chemicals including sanitizer. Make adjustments in the pH level as required for sanitizer system to work well.

Bottom Line –

Regularly flushing your hot tub plumbing is important for good reasons. It leaves your hot tub with cleaner water and a safer hot tub environment. This means you won’t need to worry about the critters floating around in your water.

Do you need a replacement for hot tub plumbing in Canada? If yes, feel free to browse the collection of hot tub plumbing available for sale at Cedar Tubs Direct. For more tips and suggestions on hot tub plumbing maintenance, please stay tuned with us!