5 Hot Tubs Chemical Products for Hot Tub

Do you use your hot tub often? If yes, it’s essential to maintain the chemistry of hot tub water. If left unattended, it can be a breeding ground for harmful pathogens that can cause illness or rashes. This is because water is maintained to be warm.

Though the hot tub is a relatively more minor body of water, it doesn’t take that long to get contaminated. Unfortunately, hot tub users often don’t test or use improper methods that lead to poor quality water. So check out the most common types of hot tub chemicals that you will need to maintain your hot tub water.

1. Sanitizer

Sanitization is an important parameter you should monitor as it helps eliminate pathogens from the water. Consider using a sanitizer to keep your hot tub water clean and clear and make it safe to use. The most common and effective sanitizers are chlorine and bromine. Bromine is the more popular method as it performs very well in hot water. However, you don’t ignore this chemical as it makes the most significant impact on the quality and health of your water.

2. pH

If the pH level of water is too low, the water will be acidic and can badly damage your hot tub. If the pH goes high, it can result in cloudy water, stains and scale. Generally, the pH should be within 7.2-7.8, and you can make adjustments by using pH down and pH up.

3. Alkalinity

Alkalinity greatly helps your pH. In short and simple words, it keeps the pH level from bouncing. You have to maintain the alkalinity of 80-120 ppm and check what works right for you. Remember that pH is strongly related to alkalinity. One affects the other.

4. Calcium Hardness

Most people consider using calcium hardness with plaster pools and think it’s not that important for fibreglass, acrylic pools or spa. You should keep in mind that the amount of calcium is essential to maintain the water clarity that you shouldn’t ignore.

5. Metal Removal

Do you fill your hot tub or spa with well water or your local water supply? It might be possible that your water contains some metals. Hence, you need to test the water for metal content like copper and iron. Both metals can cause stains on your hot tub and make your hair green if untreated for longer.

Bottom line –

You should consider several hot tub chemicals to make sure that your hot tub is ready to use safely. However, it’s not that hard to keep your hot tub water clean and clear when considering testing and treating water regularly.

If you’re not careful about maintaining your water, it will cost you more in the long run. Browse hot tub chemicals available at Northern Lights Cedar Tubs Direct and enjoy spending more time in your hot tub or spa safely and conveniently. For more information about our products, please contact us today at 1-800-759-8990.

What are the Signs to Buy Replacement for Spa Heaters?

One of the most blissful and unique things about getting a hot tub is soaking in the warm water. If your spa is unable to heat properly, then it might require replacement. Here are a few things you can check to know whether you need replacement spa heaters:

Now check whether the heater is producing heat. If it’s producing heat; but the water isn’t hot enough as you want, there are certain things you can check:

One of the common issues with spa heaters is the water flow problem. It may show up on your control panel as “FLO.” This means the water isn’t flowing through the plumbing system properly. Though the heater is an essential part of the spa plumbing system, it could cause low water temperature.

Take your filter out and clean it as thoroughly as possible, or invest in a new replacement spa filter. It will help you fix the water flow problem unless the plumbing isn’t clogged or closed the valves partially. However, the issues like low water flow, air bubbles, or air getting into the heater chamber can cause the spa heater to stop working.

Spa heater temperature is the other thing you should consider. If you have a lower-rated heater like 1 KW, it may not heat your spa water in cold weather. Even you can’t buy a big-size heater. The entire spa system is designed with the existing size heater, and getting a bigger one can result in worse issues like burning out the circuit board or overheating, or even a fire.

If you want to get around this limitation, you can consider repositioning the spa indoors or in an enclosure. In addition, you can buy a quality spa cover to trap the heat when the spa is not in use.

If the spa heater is unable to produce heat; but getting power, it may be due to the malfunctioning of your hot tub heating element or entire hot tub heater. You should take help from professionals, and they will suggest you the necessary replacement options.

Though you are not an expert, it will be a bit difficult and can be risky for you to do it on your own. Consider buying a completely new spa heating unit. Again if you’ve been using the spa for over eight years, it’s time to buy a new spa heater.

Over the use, your heater elements can corrode or rust because of the hard elements present in the water or the poor water chemistry. Check whether the hot tub has scale or build-up. If present, your heater needs to work harder and delivers less efficiency. Usually, heaters work for 8-10 years. You can maintain your spa heater by testing the water regularly and keeping the pH level between 7.2 and 7.8.

When it comes to buying replacement spa heaters, you should look no further than Northern Lights Cedar Tubs Direct. We specialize in providing Balboa spa heaters and replacement parts to ensure that your spa heating system works at its maximum efficiency and offers enormous performance in the long run. For more details about our replacement hot tub heaters, feel free to give us a call right now at 1-800-759-8990.

What to Do with a Leaking Hot Tub?

When you find a leak in your hot tub, spa owners without the whole cavity filled with spray foam will spot and fix any kind of leak easily. This is where you need professional help with your hot tub plumbing parts in Canada.

To fix a hot tub leak, you need to find the exact leak area, get parts on hand to fix the leak with good, quick-drying PVC glue, and do the work of cutting out any existing or broken pieces and glue in new, replacement hot tub plumbing parts.

If you want to get the glue PVC connection done, you need to apply the glue by using the dabber in a circular motion around the glue joint multiple times quickly for heat buildup. It helps in heating the PVC connection which ensures a solid bonding. When you apply the glue rapidly in a circular motion at least ten times, it will provide you with ample coverage and make the joint warm.

You need to plug it together by twisting slightly and hold for a few seconds like the repaired joint sets. You may want it to hold for around 30 seconds to make a good bond. You can use a PVC cleaner or primer first on the joint which will be glued. But it’s not necessary if the glue is applied perfectly. Make sure that connections are clean and dirt-free.

You may need handy tools like hose cutters or a hack saw to cut the open pieces of pipe and hose, sandpaper, or other smoothing equipment to eliminate frayed edges at the cut area. Other tools may include the PVC hot tub glue, hot tub plumbing parts, and accessibility to the leak area.

Moreover, you can prevent leaks by keeping your hot tub water maintained. Avoid any remaining water while leaving the hot tub outdoor during winter. Otherwise, it can result in manifold and plumbing cracks to handle in the spring. Hopefully, your hot tub will never require plumbing system repair; but if you do, you should buy hot tub plumbing parts in Canada.

Generally, hot tub plumbing comprises pipes, hoses, and connectors for routing water from the spa pump to the jets and back. The circular path starts at the suction intakes present in the footwell of the hot tub.

When the pump operates, it creates suction at the front part of the pump, connected to the suction intakes. This is protected by a screen or is made up of little holes to get rid of any large size objects into the hot tub plumbing system.

The pump motor spins the internal shaft which turns on the impeller, a little wheel present inside the pump which helps in moving water. The discharge area of the pump helps in expelling water and projects it towards the jets through the manifolds, the plumbing parts with large input and smaller outputs so that the water pressure is distributed evenly throughout the jets.

The glue joints hold the plumbing parts together. Some clips may lighter hoses together, but the PVC glue is very robust and is an industry-standard. Usually, the blue glue is used to bond the PVC parts instantly within a matter of a few seconds.

Do you want to know more about hot tub plumbing parts in Canada? If yes, then you should look no further than Northern Lights Cedar Tubs Direct. For more information, please visit our website today at https://www.cedartubsdirect.com/.

Understanding Spa Plumbing and PVC Fittings

Spas and hot tubs have a wide array of PVC or polyvinyl chloride pipes that encircle the tub and help in circulating water throughout. The water flow is driven by a pump which is powered by an electric motor. Both the motor and pump produce a great rate of water flow and some sort of vibration that can. Over time, it can badly affect the glued joints and other seals which cause them to leak.

Spa PVC plumbing parts and accessories include manifolds, unions, couplings, valves, hoses, tubing, gaskets, and PVC glue. All of them are used to repair spa plumbing leaks. Hot tub hoses and pipes are interconnected with the PVC fittings, manifolds, and connectors which help in routing water from a single pump to multiple jets and places within the spa including the whirlpool jets, waterfall jets, and other water features. Most recent model spas and hot tubs use a manifold plumbing system. This unit is specifically designed for distributing water pressure evenly to the individual spa jets.

When there’s a leak in a hot tub or spa, it’s suggested to check the jets and PVC fittings. They should be replaced as required to repair the source of the leak. Common issues include a cracked water manifold because of perhaps having left water in a drained spa sitting out in the freezing climate, stress crack in any spa plumbing part, etc.

It’s better to identify the leaks as soon as possible so that they can be repaired by getting the right PVC connectors, piping, and glue. More often, the hot tubs and spas need to be drained completely during the PVC repair process. However, the joints should be dry before the application of PVC glue.

To repair the spa plumbing parts, you need PVC fittings. Generally, they are referred to by their diameter. The most commonly used PVC fittings in the currently available hot tubs include 1 ½ inch and 2-inch plumbing sizes.

Generally, hot tub and spa plumbing fittings are made from PVC or ABS. They are significant accessories for spa plumbing systems and are used to connect the sections of pipe running from the skimmer and drain through the pump, filter, and heater.

Pump Unions –

The pump unions are the half union which consists of the tailpiece with o-ring and the lock nut. The common pump union size is 1.5 inches followed by 2 inches. Both larger and smaller sizes are available. A split nut union is held in place by two small size screws after being placed or screwed into the position.

Spa Unions –

The spa unions are otherwise known as complete union that joins two pipe sections together. Usually, they’re present on either side of the spa equipment like the spa pump, heater, or filter. As discussed above, half unions are pump unions and are used on spa heaters.

Spa Manifolds –

Spa manifolds are used to divide water or air into smaller branches that terminate at a spa jet or air bubble zone.

Bottom Line –

Do you want to learn more about spa plumbing parts and PVC fittings? Feel free to contact Northern Lights Cedar Tubs Direct at 1-800-759-8990.

Why Do You Buy Balboa BP501 Retrofit Kit?

Are you investing in an in-home sauna? If yes, then you’ll be able to enjoy enormous rest, relaxation and rejuvenation from the comfort and convenience of your own home. Availability of different sauna heating options and shopping for the right choice can be a bit confusing.

Hence, you should know certain things about hot tub heaters so that you can make the best decision when it comes to designing your in-home sauna. When it comes to choosing the hot tub heating choices, you should look no further than Balboa hot tub heaters. Out of all options, Balboa BP501 Retrofit Kit makes the right choice. Please take a look at the post and know why you buy this kit:

Balboa BP501 Retrofit Kit comes with a 5.5Kw Digital Spa Controller, and TP400W Controller. Made in America, this spa kit features wireless smart phone integration.

The Main Takeaways of the Balboa BP501 Retrofit Kit

The Reliability –

The Balboa BP Series is the newly designed and developed line-up of spa kits focused on reliability. The Balboa BP501 Retrofit Kit has a more advanced carbon base casing. This casing is impact-resistant and superb flame retardant. The new features of the spa kit include quick disconnect heating elements, Wi-Fi Ready, and Press and Hold topside navigation buttons.

The Retrofit Kit –

This retrofit kit is specifically designed to replace any spa pack featuring any other hot tub heater manufacturer like Gecko, Spa Guts, Hydro-Quip, Colman, Arctic Spa, LA Spas, and Beach Comber, Sundance, Maxx Spa, Hydro Spa, Emerald Spas, Hot Spring, etc.

The retrofit kit has a TP400 digital topside controller and a set of cables for two pumps and ozone. You’ll be provided with detailed retrofit instructions so that you can change over to Balboa – a premier name in hot tub heaters.

The M7 Technology –

The Balboa BP Series is made with the patented M7 technology, the industry-best technology in the spa industry. It has completely digital circuitry, which results in less failure, and a more precise heating range. This spa pack has a high range of 80-104F and a low range of 50-99F operation.

This latest technology eliminates the requirement of pressure and remote heat sensors which are common on other older spa packs. The technology allows the spa pack to be located in any place or direction just before or after the pump or before or after the filter.

The Programmable Features –

The BP Series spa pack features 12 or 24-hour filter cycle programming by the duration of the time of day, different power saving modes like the standard, economy, and standard in economy mode, clean upcycle, panel lock, temperature lock, freeze protection, ozone suppression, standby mode for filter change and sophisticated diagnosis, reminder measures etc.

Bottom Line –

Are you looking to buy spa kits featuring the best-in-class hot tub heaters? Please check out Balboa spa kits and hot tub heaters available at Northern Lights Cedar Tubs Direct. For more information, please contact us today at 1-800-759-8990.

Why Do You Invest in Balboa Spa Heaters?

One element that perfectly defines a special spa experience is the spa heater. Not every pump and jet around the world can provide the ultimate level of heating water evenly and properly at the right temperatures. Balboa spa heaters focus mainly on the inline heater space. They are literal pipes that should be installed perfectly with the existing plumbing system.

The configurations help in mounting all-important sensors. They come with a built-in pressure switch – which is the critical component that keeps the hot tub and spa safe to use for humans. It does so by sending signals to switch off the components within a few fractions of seconds.

When something goes out of control from water pressure to heat level, you can count on a Balboa spa heater to act soon without any hesitation. The hot tub heater is one of the most important components of the spa.

A perfectly engineered hot tub heater ensures faster water heating while maintaining the temperature for a long time. There’s a huge availability of spa heaters available to choose from for your indoor and outdoor hot tubs and spas. So, making the most reliable choice can be pretty confusing.

Balboa is the leading name in the spa heater industry. Their parts are considered to be more reliable. When they fail to work because of damage, they are quite easy to repair. Sooner or later, you’ll need to change your hot tub heater unit. There are so many reasons why you should consider heater replacement. Some of them include slow heating, no heating, increased energy consumption because of less efficiency, etc.

If you use your hot tub or spa often, investing in one of the most efficient Balboa spa heaters can help you save more money in the long run. It’s highly suggested to take help from a certified service technician for heater replacement. Even you can do it on your own if you’re inclined mechanically.

Please remember that improper installation of spa heaters can result in damage to the heater or other significant components. If you’re not confident in your ability, you should call your local hot tub technician to get the installation done.

When it comes to buying spa heaters, you should look no further than Balboa Spa Pack VS501. This is an auxiliary secondary hot tub heater plumbed in series after the main spa pack heater. It comes with 5.5 kW additional heating ability which makes the heating power double and reduces the heating time to half.

This spa pack needs 240 volts 60hz 30 Amp two-pole service with GFCI protection. It’s provided with a control cable connecting around the main spa packs heater connection circuit board terminals. This heating system works like slave water which gets energy when the main spa pack heater gets energized. It features with overheat interlock and is UL Listed in the USA and Canada.

So, why are waiting for? Now is the time to relax and unwind in the inviting waters of hot tubs and spas. For more information, please contact Northern Lights Cedar Tubs Direct at 1-800-759-8990

Why Do You Need Wood-Fired Spa Heaters?

 

Many homeowners preferring custom home saunas are unsure of where to start while choosing spa heaters. Most DIY sauna kits can be customized to add one of two main types of sauna heaters i.e. electrical and wood-fired sauna heaters.

You can choose your sauna heating option depending on the size and location of your sauna. Generally, sauna enthusiasts invest in wood-burning spa heaters for their traditional aroma and reliance on cedar wood. Please check out the significance of a wood-fired sauna heating kit for your home sauna.

Enhance overall home aesthetics –

When you sit around a wood-burning sauna, you’ll be drawn to the comfy and warm aesthetics of the roaring fire. The same goes for the wood-burning heater in a sauna. When you bask in the comfortable heat of your new home sauna, you can take advantage of the uniqueness and cozy aesthetics of your sauna. You will get benefited from the integration of a wood-burning spa heater into an outdoor sauna at your home.

Minimize costs of operation –

Do you have access to a steady supply of wood for your home? If yes, then you’ll be able to minimize the sauna operational costs with a wood-fired sauna heater. It won’t require electricity for the operation which means your sauna building and installation process will be a lot easier.

Even, you won’t need an electrical contractor to help you through the installation. In addition, when you install a wood-burning sauna heater, you can enjoy a sauna session at any time of day or night even if the power goes.

Experience the traditional sauna fragrance –

Traditional saunas used wood-burning sauna heaters to contribute to the overall experience of the sauna users. Apart from the beauty and tranquillity of a roaring sauna fire, you will be rewarded with the soothing fragrance of a wood-burning fire.

You’ll be able to relax and unwind your body, mind and soul in your home sauna environment. Though electric sauna heaters can produce high heat, they can’t simply match the fragrance and complexity of a wood-burning fire.

Final Consideration –

At Northern Lights Cedar Tubs Direct, we specialize in providing a comprehensive range of spa heaters including top-rated electrical and wood-burning models for your requirements. Whether you look for a wood-burning sauna heater to complement your traditional barrel sauna or an ultra-modern electric heater for an indoor sauna, we can help you choose the right heating system for your needs.

Besides, you can easily customize our sauna kits to feature a sauna heater of your choice and any hot tub accessories as required. With little to no building experience, our DIY sauna kits can help you build your new sauna as soon as possible.

If you need professional help with buying your sauna heater and other sauna accessories, feel free to contact us today at 1-800-759-8990. We’ll help you choose from our available selection of sauna heaters and make the right selection for your sauna at home.